elliesy
  • elliesy
  • 51% (Neutral)
  • Major Topic Starter
9 years ago
How can i Resize the GLA Command Center structure ... and Also the other building i want a medium size
.
.
i'am still playing GENERALS 1
Sponsor
CommieDog
9 years ago
I'm not sure if it works for vanilla Generals, but in ZH at least you can add a Scale= line that scales each dimension by the square of the amount you specify. For instance, Scale=2 would bake a building 4 times as wide, 4 times as long, and 4 times as high. Give it a try.
UserPostedImage 
CommieDog: Because someone has to do your dirty work for you
elliesy
  • elliesy
  • 51% (Neutral)
  • Major Topic Starter
mr_hymn_
9 years ago
Simply put in a code near cost and build time.

Scale = 1 mean original size.
Scale = 2 is 4x of actual size.
Scale = 3 is 6x of actual size.

So if you like to make it small just simply put below 1

Ex Scale = 0.5

However you need to edit the geometry too otherwise your building will overlaps with your unit and other buildings.
mr_hymn_
9 years ago
I made a huge gigantic tank. At first I am scale overlord tank to 4 and it's size about half of the map so I am reduced to 2 and size is almost double of command center.

I gave it loads of HP and insane gun but so slow with very slow traverse for balance purpose.

BTW the geometry you need to multiply by the size you put in too.

Geometry = BOX
GeometryMajorRadius = 8.0
GeometryMinorRadius = 8.0
GeometryHeight = 20.0

So if you scale it by 2 you have to put in 8 x 4 = 32 and 20 x 4 = 80
Because I tried 8 x 2 and 20 x 2 before and it doesn't end well.
CommieDog
8 years ago

Where can i edit Sir...:D tnx

Originally Posted by: elliesy 


The file is \Data\INI\Object\FactionObject.ini. You can extract it from INI.big if you haven't already.
UserPostedImage 
CommieDog: Because someone has to do your dirty work for you
elliesy
  • elliesy
  • 51% (Neutral)
  • Major Topic Starter
8 years ago

Where can i edit Sir...:D tnx

Originally Posted by: CommieDog 


The file is \Data\INI\Object\FactionObject.ini. You can extract it from INI.big if you haven't already.

Originally Posted by: elliesy 



no file like that in general 1 only " FactionBuilding.ini "
mr_hymn_
8 years ago

Where can i edit Sir...:D tnx

Originally Posted by: elliesy 


The file is \Data\INI\Object\FactionObject.ini. You can extract it from INI.big if you haven't already.

Originally Posted by: CommieDog 



no file like that in general 1 only " FactionBuilding.ini "

Originally Posted by: elliesy 



Maybe mistakes. It's FactionBuilding.ini

Edit weapon object is WeaponObject.ini
elliesy
  • elliesy
  • 51% (Neutral)
  • Major Topic Starter
8 years ago
Yes Sir Mr._hymn .... it's really rea'ly work ..:D
tnx for Help GENERALS ..:D
.
.
i never tried before
question can i edit in the finalbig apps directly and save it.?
.
.
whado you think it being crash ..:D
mr_hymn_
8 years ago
Nope it won't but I am rather extract it since all ini in the big file is original just like emergency back up in case you screwed up.
Otherwise you need to backup copy of the final.big, just in case because very few there is case that crashreleaseinfo.txt cannot provide you the information why the game is crash.

Most of the time the technical difficulties will provide you the info but sometimes don't
CommieDog
8 years ago

Where can i edit Sir...:D tnx

Originally Posted by: Mr_Hymn_ 


The file is \Data\INI\Object\FactionObject.ini. You can extract it from INI.big if you haven't already.

Originally Posted by: elliesy 



no file like that in general 1 only " FactionBuilding.ini "

Originally Posted by: CommieDog 



Maybe mistakes. It's FactionBuilding.ini

Edit weapon object is WeaponObject.ini

Originally Posted by: elliesy 


Whoops. My mistake.
UserPostedImage 
CommieDog: Because someone has to do your dirty work for you