Reset Password · C&C Labs Forums

Welcome Guest! You can not login or register.

Posted by: martinamama - Thursday, July 11, 2019 3:17:18 PM
Hey, i have Commander and Conquer 3 Tiberium Wars (Steam Edition). i used WorldBuilder for a Map. I saved it and afterwards wanted to start WorldBuilder again. Then the Error came up: [h] !debug.io flat add eN !debug.add l + always ================================================================================ Direct3D error 0x0x8007000e (E_OUTOFMEMORY) 20 addresses: (unknown)(0): WorldBuilder.exe+825384 (unknown) (unknown)(0): WorldBuilder.exe+1362422 (unknown) (unknown)(0): WorldBuilder.exe+1417692 (unknown) (unknown)(0): WorldBuilder.exe+1418716 (unknown) (unknown)(0): WorldBuilder.exe+839235 (unknown) (unknown)(0): WorldBuilder.exe+963442 (unknown) (unknown)(0): WorldBuilder.exe+971067 (unknown) (unknown)(0): WorldBuilder.exe+1010960 (unknown) (unknown)(0): WorldBuilder.exe+564256 (unknown) (unknown)(0): WorldBuilder.exe+752714 (unknown) (unknown)(0): WorldBuilder.exe+756446 (unknown) (unknown)(0): WorldBuilder.exe+756057 (unknown) (unknown)(0): MFC80.DLL+379663 (unknown) (unknown)(0): MFC80.DLL+386373 (unknown) (unknown)(0): WorldBuilder.exe+724433 (unknown) (unknown)(0): MFC80.DLL+372438 (unknown) (unknown)(0): MFC80.DLL+372902 (unknown) (unknown)(0): WorldBuilder.exe+723471 (unknown) (unknown)(0): MFC80.DLL+434612 (unknown) (unknown)(0): WorldBuilder.exe+722452 (unknown) ================================================================================ EXCEPTION_HANDLE_OUR_CRASH_DIALOG: Debug crash dialog was shown. Check previous log message. Exception occured at 774d2cf2 KERNELBASE.dll+0x112cf2, RaiseException+0x62. Version: release EAX:0x0019e308 EBX:0x0103f8c8 ECX:0x00000000 EDX:0x0019e314 ESI:0x00000001 EDI:0x00000000 EIP:0x774d2cf2 ESP:0x0019e308 EBP:0x0019e360 Flags:%00000000000000000000001001000110 CS:0x0023 DS:0x002b SS:0x002b ES:0x002b FS:0x0053 GS:0x002b CW:%0000000001111111 SW:%0100000000100111 TW:%1111111111111111 ErrOfs: 0x769c06d9 ErrSel: 0x00000000 DataOfs: 0x00000000 DataSel: 0x00000000 Cr0NpxState: 0x00000000 ST(0) 2bcb1c0b06020000ffff -1.#IND00 ST(1) 0000000000000000ffff -1.#IND00 ST(2) 00000000000000000000 0.000000 ST(3) 00000000002071f7fe3f 0.966570 ST(4) 0000000000b53580ff3f 1.001639 ST(5) 0000000000000080ff3f 1.000000 ST(6) 0000000000000080fb3f 0.062500 ST(7) 0000000000000080fb3f 0.062500 21 addresses: (unknown)(0): KERNELBASE.dll+1125618 RaiseException+98 (unknown)(0): WorldBuilder.exe+826321 (unknown) (unknown)(0): WorldBuilder.exe+1362422 (unknown) (unknown)(0): WorldBuilder.exe+1417692 (unknown) (unknown)(0): WorldBuilder.exe+1418716 (unknown) (unknown)(0): WorldBuilder.exe+839235 (unknown) (unknown)(0): WorldBuilder.exe+963442 (unknown) (unknown)(0): WorldBuilder.exe+971067 (unknown) (unknown)(0): WorldBuilder.exe+1010960 (unknown) (unknown)(0): WorldBuilder.exe+564256 (unknown) (unknown)(0): WorldBuilder.exe+752714 (unknown) (unknown)(0): WorldBuilder.exe+756446 (unknown) (unknown)(0): WorldBuilder.exe+756057 (unknown) (unknown)(0): MFC80.DLL+379663 (unknown) (unknown)(0): MFC80.DLL+386373 (unknown) (unknown)(0): WorldBuilder.exe+724433 (unknown) (unknown)(0): MFC80.DLL+372438 (unknown) (unknown)(0): MFC80.DLL+372902 (unknown) (unknown)(0): WorldBuilder.exe+723471 (unknown) (unknown)(0): MFC80.DLL+434612 (unknown) (unknown)(0): WorldBuilder.exe+722452 (unknown) Bytes around EIP: 774d2cd2 89 44 24 10 c1 e0 02 50 51 8d 44 24 1c 50 e8 bf ‰D$.Áà.PQD$.Pè¿ 774d2ce2 85 00 00 83 c4 0c 8d 04 24 50 ff 15 9c 33 57 77 …..ƒÄ..$Pÿ.œ3Ww 774d2cf2 8b 4c 24 54 33 cc e8 f3 43 00 00 8b e5 5d c2 10 ‹L$T3ÌèóC..‹å]Â. 774d2d02 00 83 64 24 10 00 eb de 6a 0f 58 eb c3 cc cc cc .ƒd$..ëÞj.XëÃÌÌÌ 774d2d12 cc cc cc cc cc cc cc cc cc cc cc cc cc cc 8b ff ÌÌÌÌÌÌÌÌÌÌÌÌÌÌ‹ÿ[/h] I tried to look on the internet for a solution but they all have the problem when starting the Map. I get this error when i start the program. It doesnt even let me into the Program. I start the Program --> instant this error I tried reinstalling WorldBuilder and C&C3 but even after reinstalling both and changing the installPath in regedit etc.. i still get the same error. Iam kinda lost. My guess is that there is some file which isnt removed by deinstalling WorldBuilder. Please Help me! EDIT: Idk if thats an issue but in regedit the installpath always removes the last \ when i start the game. I have to add the backslash every time i start the game [ATTACH]2233[/Attach] [ATTACH]2236[/Attach] [ATTACH]2238[/Attach] [ATTACH]2239[/Attach]

Posted by: martinamama - Thursday, July 11, 2019 3:17:18 PM

Hey, i have Commander and Conquer 3 Tiberium Wars (Steam Edition). i used WorldBuilder for a Map. I saved it and afterwards wanted to start WorldBuilder again. Then the Error came up: [h] !debug.io flat add *eN !debug.add l + always* ================================================================================ Direct3D error 0x0x8007000e (E_OUTOFMEMORY) 20 addresses: (unknown)(0): WorldBuilder.exe+825384 (unknown) (unknown)(0): WorldBuilder.exe+1362422 (unknown) (unknown)(0): WorldBuilder.exe+1417692 (unknown) (unknown)(0): WorldBuilder.exe+1418716 (unknown) (unknown)(0): WorldBuilder.exe+839235 (unknown) (unknown)(0): WorldBuilder.exe+963442 (unknown) (unknown)(0): WorldBuilder.exe+971067 (unknown) (unknown)(0): WorldBuilder.exe+1010960 (unknown) (unknown)(0): WorldBuilder.exe+564256 (unknown) (unknown)(0): WorldBuilder.exe+752714 (unknown) (unknown)(0): WorldBuilder.exe+756446 (unknown) (unknown)(0): WorldBuilder.exe+756057 (unknown) (unknown)(0): MFC80.DLL+379663 (unknown) (unknown)(0): MFC80.DLL+386373 (unknown) (unknown)(0): WorldBuilder.exe+724433 (unknown) (unknown)(0): MFC80.DLL+372438 (unknown) (unknown)(0): MFC80.DLL+372902 (unknown) (unknown)(0): WorldBuilder.exe+723471 (unknown) (unknown)(0): MFC80.DLL+434612 (unknown) (unknown)(0): WorldBuilder.exe+722452 (unknown) ================================================================================ EXCEPTION_HANDLE_OUR_CRASH_DIALOG: Debug crash dialog was shown. Check previous log message. Exception occured at 774d2cf2 KERNELBASE.dll+0x112cf2, RaiseException+0x62. Version: release EAX:0x0019e308 EBX:0x0103f8c8 ECX:0x00000000 EDX:0x0019e314 ESI:0x00000001 EDI:0x00000000 EIP:0x774d2cf2 ESP:0x0019e308 EBP:0x0019e360 Flags:%00000000000000000000001001000110 CS:0x0023 DS:0x002b SS:0x002b ES:0x002b FS:0x0053 GS:0x002b CW:%0000000001111111 SW:%0100000000100111 TW:%1111111111111111 ErrOfs: 0x769c06d9 ErrSel: 0x00000000 DataOfs: 0x00000000 DataSel: 0x00000000 Cr0NpxState: 0x00000000 ST(0) 2bcb1c0b06020000ffff -1.#IND00 ST(1) 0000000000000000ffff -1.#IND00 ST(2) 00000000000000000000 0.000000 ST(3) 00000000002071f7fe3f 0.966570 ST(4) 0000000000b53580ff3f 1.001639 ST(5) 0000000000000080ff3f 1.000000 ST(6) 0000000000000080fb3f 0.062500 ST(7) 0000000000000080fb3f 0.062500 21 addresses: (unknown)(0): KERNELBASE.dll+1125618 RaiseException+98 (unknown)(0): WorldBuilder.exe+826321 (unknown) (unknown)(0): WorldBuilder.exe+1362422 (unknown) (unknown)(0): WorldBuilder.exe+1417692 (unknown) (unknown)(0): WorldBuilder.exe+1418716 (unknown) (unknown)(0): WorldBuilder.exe+839235 (unknown) (unknown)(0): WorldBuilder.exe+963442 (unknown) (unknown)(0): WorldBuilder.exe+971067 (unknown) (unknown)(0): WorldBuilder.exe+1010960 (unknown) (unknown)(0): WorldBuilder.exe+564256 (unknown) (unknown)(0): WorldBuilder.exe+752714 (unknown) (unknown)(0): WorldBuilder.exe+756446 (unknown) (unknown)(0): WorldBuilder.exe+756057 (unknown) (unknown)(0): MFC80.DLL+379663 (unknown) (unknown)(0): MFC80.DLL+386373 (unknown) (unknown)(0): WorldBuilder.exe+724433 (unknown) (unknown)(0): MFC80.DLL+372438 (unknown) (unknown)(0): MFC80.DLL+372902 (unknown) (unknown)(0): WorldBuilder.exe+723471 (unknown) (unknown)(0): MFC80.DLL+434612 (unknown) (unknown)(0): WorldBuilder.exe+722452 (unknown) Bytes around EIP: 774d2cd2 89 44 24 10 c1 e0 02 50 51 8d 44 24 1c 50 e8 bf ‰D$.Áà.PQD$.Pè¿ 774d2ce2 85 00 00 83 c4 0c 8d 04 24 50 ff 15 9c 33 57 77 …..ƒÄ..$Pÿ.œ3Ww 774d2cf2 8b 4c 24 54 33 cc e8 f3 43 00 00 8b e5 5d c2 10 ‹L$T3ÌèóC..‹å]Â. 774d2d02 00 83 64 24 10 00 eb de 6a 0f 58 eb c3 cc cc cc .ƒd$..ëÞj.XëÃÌÌÌ 774d2d12 cc cc cc cc cc cc cc cc cc cc cc cc cc cc 8b ff ÌÌÌÌÌÌÌÌÌÌÌÌÌÌ‹ÿ[/h] I tried to look on the internet for a solution but they all have the problem when starting the Map. I get this error when i start the program. It doesnt even let me into the Program. I start the Program --> instant this error I tried reinstalling WorldBuilder and C&C3 but even after reinstalling both and changing the installPath in regedit etc.. i still get the same error. Iam kinda lost. My guess is that there is some file which isnt removed by deinstalling WorldBuilder. Please Help me! EDIT: Idk if thats an issue but in regedit the installpath always removes the last \ when i start the game. I have to add the backslash every time i start the game [ATTACH]2233[/Attach] [ATTACH]2236[/Attach] [ATTACH]2238[/Attach] [ATTACH]2239[/Attach]

Posted by: AdrianeMapMaker - Friday, July 12, 2019 9:41:19 AM
you can ask the map makers on cnc related discords like this https://discord.gg/zktcZQY

Important Information: